Deluxe mobile lip mount cable assembly Deluxe Coax cable assembly for mounting antennas w/t NMO Connectors Replacement coax cable for the Comet CK-3NMO, or for Lip mounts designed to accept an NMO connector. The first 50cm of the coax itRG-174/U type coax for easy entry thru a vehicles' weather seal without causing wind noise, water leaks or damage to the coax. Coax length: 16? 9? total The PL-259 connector has a reverse threaded barrel. Turn the outer barrel clock-wise and it will thread off the connector body. The coax can then be routed through small holes or pushed through tight spaces without completely removing the connector. After routing the coax into place, screw the barrel back onto the PL-259 connector. To shorten the over-all length of the coax: Remove the barrel as above and de-solder the center pin of the PL-259 The connector body then screws apart and the cable can be cut to the desired length. Re-assemble the connector. Max Power: HF: 100W VHF: 75W UHF: 50W Additional Model #'s 221-CK-3NMO5 221-CK3NMO5 CK-3NMO5 CK3NMO5 UPC: 4932273163969
